Description
Need a weld-free way to add EGT fittings to a cast iron manifold? Drill and tap it for 1/8″ NPT pipe thread and bolt one of these in! Works with our Red Avenger and Black Stinger thermocouples.
$14.00
-
Need a weld-free way to add EGT fittings to a cast iron manifold? Drill and tap it for 1/8″ NPT pipe thread and bolt one of these in! Works with our Red Avenger and Black Stinger thermocouples.
What diameter EGT probes does this work with?
What size drill should I use?
What do I do if I need to remove the probes? Your notes on EGT port caps indicate they don’t work with these fittings.
There are no questions yet, be the first to ask something for this product.
GM Closed Element Coolant / Oil Temperature Sensor with Pigtail Suitable for use as a Coolant Temperature Sensor (CLT) or Oil Temperature Sensor on all vehicles. This sensor can be used as an Intake Air Temp Sensor (IAT) on naturally aspirated vehicl...
Add to cartGot a stainless steel exhaust? Here's what you need to install an EGT probe in it. Weld this compression fitting into your headers or exhaust pipe. It holds a EGT probe securely in place. Compression type fitting provides a leak-free seal that holds up at...
Add to cartDL32 Datalogger and Sensor Controller The DL-32 is a complete vehicle-mounted data-logging system for advanced engine tuning. The system is anchored by Innovate's award-winning digital wideband air/fuel ratio technology, but also includes flexible sens...
Read moreMeasure your exhaust gas temperature per bank or per cylinder with this open tip EGT probe. It is a K type thermocouple with an 8 foot lead. The open tip EGT probe reads slightly faster than an enclosed tip probe, but tends to wear faster in extreme heat ...
Add to cartThe PL-1 is the latest in Innovate Motorsports’ line-up of products to allow for easy data logging of your MTS (Modular Tuning System) compatible product. Whether you have an LC-1 & SSI-4, MTX gauges, or any other combination of Innovate Motorsports...
Add to cartTPS-3 Connector (Uncrimped) GM Style 3-pin TPS Connector complete with: the 3-pin connector three pins plus an extra fourth pin (just in case)
Add to cart
Reviews
There are no reviews yet.