Description
Need a weld-free way to add EGT fittings to a cast iron manifold? Drill and tap it for 1/8″ NPT pipe thread and bolt one of these in! Works with our Red Avenger and Black Stinger thermocouples.
$14.00
-
Need a weld-free way to add EGT fittings to a cast iron manifold? Drill and tap it for 1/8″ NPT pipe thread and bolt one of these in! Works with our Red Avenger and Black Stinger thermocouples.
What diameter EGT probes does this work with?
What size drill should I use?
What do I do if I need to remove the probes? Your notes on EGT port caps indicate they don’t work with these fittings.
There are no questions yet, be the first to ask something for this product.
Bosch Style Fuel Injector Plug with 6" Wire Pigtail Fits a wide variety of cars that use Bosch injectors, including many Ford, GM, and BMW products. This connector also fits many Bosch temperature sensors. This connector incorporates seals on the pins ...
Add to cartMeasure your exhaust gas temperature per bank or per cylinder with a longer lasting, closed tip EGT probe, a K type thermocouple with an 8 foot lead. The open tip probe reads slightly faster than a closed tip EGT Probe, but tends to wear faster in extreme...
Add to cartGM Closed Element Coolant / Oil Temperature Sensor with Pigtail Suitable for use as a Coolant Temperature Sensor (CLT) or Oil Temperature Sensor on all vehicles. This sensor can be used as an Intake Air Temp Sensor (IAT) on naturally aspirated vehicl...
Add to cartTPS-3 Connector (Uncrimped) GM Style 3-pin TPS Connector complete with: the 3-pin connector three pins plus an extra fourth pin (just in case)
Add to cartThis 2 wire pigtail connector replaces GM part number 12101855. Used on a variety of applications, including some distribtutorless ignitions, vehicle speed sensors, and many chassis wiring locations. Please check mating connectors before ordering.
Add to cartEnd cap to seal off your RacePak Vnet wiring harness.
Add to cart
Reviews
There are no reviews yet.