Temperature and MAP Sensors for MegaSquirt

Showing all 9 results

MAP Sensor – GM 3 Bar MAP Sensor
5 out of 5
$78.00
GM 3 Bar MAP Sensor aka Manifold Absolute Pressure Sensor. This sensor is good for up to 29psi of turbo/supercharger boost and is fully compatible with the MS3Pro ECU and all flavors of the MegaSquirt EMS / MicroSquirt EMS. Replaces GM Part Numbers 12...
Add to cart
GM IAT Sensor with open element & pigtail
5 out of 5
$24.49
GM IAT Temperature Sensor with open element, includes 6" pigtail GM IAT (Intake Air Temperature) Sensor with open element is the recommended 'Fast-Response' Intake Air Temp Sensor (IAT) for use on forced induction vehicles. These GM Intake Air Temperat...
Add to cart
GM Closed Element CLT/Oil Temperature Sensor with Pigtail
5 out of 5
$22.99
GM Closed Element Coolant / Oil Temperature Sensor with Pigtail Suitable for use as a Coolant Temperature Sensor (CLT) or Oil Temperature Sensor on all vehicles. This sensor can be used as an Intake Air Temp Sensor (IAT) on naturally aspirated vehicl...
Add to cart
3/8″ NPT Aluminum Weld-On Bung for IAT or CLT Sensor
$12.99
3/8" NPT Aluminum Weld-On Bung for IAT or CLT Sensor Bung is 6061-T6 aluminum alloy, no plug is included.
Add to cart
3/8″ NPT Stainless Steel Weld-On Bung for IAT or CLT Sensor
5 out of 5
$12.99
3/8" NPT Stainless Steel Weld-On Bung for IAT or CLT Sensor Our 3/8" pipe fitting for temperature sensors is now available in stainless steel. This one can be welded to either stainless or mild steel. Comes with galvanized steel plug as well.
Add to cart
MAP – GM 3 Bar MAP Sensor 6″ Pigtail
$12.49
Compatible with standard keying of GM's 3-Bar Map Sensor. This plug features 6" of pigtail and is ready to be added to your wiring harness. Color coding when used with our 3 bar MAP sensor is as follows: Black - Sensor Ground Green - Signal...
Add to cart
GM Open Element IAT Sensor with Connector
5 out of 5
$23.00
These are the proper GM-style sensors for use with the MegaSquirt line of ECUs and come with the weatherproof connector and crimp pins. One extra crimp pin is included as a spare. The threads are 3/8" NPT pipe thread - note that isn't an actual 3/8" o...
Add to cart
GM Closed Element CLT/Oil Sensor with Connector
5 out of 5
$19.99
These are the proper GM-style sensors for use with the MegaSquirt line of ECUs and come with the weatherproof connector and crimp pins. Suitable for use as a coolant temperature or oil temperature sensor, and is occasionally used as an air temperature s...
Add to cart
GM 3Bar MAP Sensor Uncrimped Connector
$9.00
Plug and pin set for a GM 3-bar MAP sensor. We include an extra pin and wire seal just in case you need it as well. Also available as a pigtail, if preferred.
Add to cart